Question: How do I increase the satin width on a design?

Answer:
Using the STANDARD Controller:

1. Load the design as normal
2. Press the SETTING button
3. Press the DOWN button to access the X SATIN command (#6)
4. Press the SET button
5. The machine will display X SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
6. Type in your choice; i.e. 2
7. Press the SET button
8. Press the DOWN button to access the Y SATIN command (#7)
9. Press the SET button
10. The machine will display Y SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
11. Type in your choice; i.e. 2
12. Press the SET button
13. Press the PREVIOUS button twice

Using the LCD Controller:

1. Load the design as normal
2. Press the SETTING button (F3)
3. Press the BASIC button (F1)
4. Press the DOWN ARROW button (F2) to access the X SATIN command (#5)
5. The machine will display X SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
6. Type in your choice; i.e. 2
7. Press the DOWN ARROW button (F2) to access the Y SATIN command (#6)
8. The machine will display Y SATIN: 0 [RANGE 0 – 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
9. Type in your choice; i.e. 2
10. Press the PREVIOUS button twice