EXPANDED MEMORY SIZE

The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.

GENERAL REPETITION WORK

The same design can be repeated up to 99 times along the X and Y axis.

SPECIAL REPETITION WORK

Several designs can be repeated up to 63 times at different angles and directions.

MIRROR IMAGE CONVERSION AND DESIGN DIRECTION

Rotate your designs from 0° to 359° and reverse the design on its X axis.

ENLARGE AND REDUCE DESIGN

from 50% to 200%.

AUTOMATIC SELECTION OF NEEDLE BAR

Select the order of the needle bar.

AUTOMATIC OFFSET FOR APPLIQUE and EMBLEMS

After the embroidery is finished, the frame returns to the offset point.

MANUAL OFFSET

You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work.

FLOAT STITCH FUNCTION

Both the frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching.

FRAME BACKWARD

When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.

AUTOMATIC TRIMMING

The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product.

AUTOMATIC UPPER/LOWER THREAD BREAK SENSING

The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.

AUTO DESIGN RECOVERY AFTER POWER FAILURE

When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.

3.5" FLOPPY DRIVE (EMBEDDED)

A 3.5" floppy drive is embedded in the operation panel for you to read or store designs. Both 2DD and 2HD disks can be used.

EDIT FUNCTION

You can delete, change, or insert stitch data and function cades (jump, finish, trimming).

RPM

The screen indicates rpm.

FRAME MOVEMENT SPEED

You can adjust the frame speed to high, medium, or low.

UNUSED MEMORY

The screen indicates the memory available for use.

TAPE CODE COMPATIBILITY

2-binary and 3-binary tape codes can be edited.

AUTO-RECOGNITION OF OTHER COMPANIES DESIGN CODES

Boring is open-work incorporated into embroidered designs; a sharp-pointed instrument punctures, or bores, the fabric, and stitches are made around the opening to enclose the raw edges.

When installing the boring device to the needle bar, make sure the tip of the blade is not touching your finger.

An Exclusive feature from SWF. The Quick Cap Change System will save you time and make it easy to switch from flat embroidering to cap embroidering.

Various kinds of cording materials can be attached at high speeds with this special attachment. A simple adjustment of the device height varies the stitch volume and expands the range of embroidery expression.

A wide variety of sequins, in various shapes and sizes can be added easily and quickly at speeds of up to 1000 spm to virtually any garment with this special